
This board is an advanced version of Arduino Uno.Moreover, this board also incorporates Secure Element = ATECC608A and Radio module = u-blox NINA-W102 The operating voltage of this board is 5V.And the recommended input voltage ranges from 7V to 12V. The DC current for the 3.3V pin is 50 mA and the DC current per I/O pin is 20mA.While SRAM is used to manipulate and generate variables when it is activated.


The EEPROM is a non-volatile memory which means it stays stored in the board even if power is removed from the board.The flash memory is 48KB that is mainly employed to store the sketch (Arduino program is called a sketch) while the EEPROM is 256bytes and SRAM is 6KB.There are total 14 digital I/O incorporated on the board out of which 5 are used as PWM pins and 6 analog pins are available on the board.The oscillator speed is 16MHz which is required for the synchronization of all internal functions.The safe and secure WiFi connection makes it an ideal pick for several industries including consumer electronics, automotive, agriculture, logging data, and small home automation projects.A brand new ECC608 crypto chip accelerator is included on the board to ensure a secure WiFi connection.Generally employed to develop fall sensors, step counters, door opening alarms. Contains a temperature sensor and a 6 axis accelerometer/gyroscope for motion sensing.The Arduino Uno WiFi Rev 2 is a microcontroller board that is mainly based on the ATmega4809 microcontroller.I suggest you read this entire post till the end as I’ll detail the complete Introduction to Arduino Uno WiFi Rev2 covering pinout, pin description, features, programming, and applications. The board contains 14 digital I/O pins, 5 PWM pins, 6 analog pins, one SPI protocol, one I2C, and one UART communication protocol. In this post today, I’ll walk you through the Introduction to Arduino Uno WiFi Rev 2.Īrduino Uno WiFi Rev 2 is a microcontroller board based on ATmega4809 and carries an ECC608 crypto chip to ensure a secure and safe WiFi connection.
